国产99热精品_欧美疯狂做受xxxx猛交_婷婷在线网站_日韩无遮挡毛片_欧美高清momspuss_欧美激情福利

FLDA3405ST_FLDA3406C_FLDA3407G_FLDA3408ST_FLDA3409ST轉子流量計OMEGA
FLD series rotor flowmeter is a kind of precision instrument, which is specially used to read the flow directly. They embody the simple, universal and economical characteristics inherent in the classical rotor flowmeter. It is very suitable for measuring carrier gas, indicating and controlling the gas in the process of processing in the chromatographic separation method. It is also very suitable for gas measurement in laboratories and experimental factories, as well as flow and liquid level indication. When fully assembled and shipped, these flowmeters include standard fittings (available in a variety of materials), side panels, thicker front enlargement shields and back panels, as well as built-in control valves and flow pipes. Using the selected acrylic triangle frame FLTR-1, the panel mounting mode can be transformed into the bracket mounting mode. The trigonometer is equipped with a level gauge and a leveling screw.

FLDA3405ST_FLDA3406C_FLDA3407G_FLDA3408ST_FLDA3409ST轉子流量計OMEGA

Standard Accuracy: Full Range (+5%)

Repeatability: +0.25%

Available Flow Range: Minimum 10:1

Maximum working pressure: 200 psig/13.8 bars

Maximum operating temperature: 121 C (250 F)

Texture of material

Flow tube: thick-walled borosilicate glass

Float: glass, sapphire, 316 stainless steel, tungsten cobalt carbide and tantalum contact with liquid installation joint selection: black anodic alumina or 316 stainless steel

Side panel: black anodic alumina

Frontal shield: polycarbonate resin with lenses for lengthwise magnification to enhance reading resolution

Back: 1_8"Thick White Acrylic Resin

O-rings and fillers: Sodium butadiene rubber O-rings are used in aluminium/copper flowmeters. Fluorine Rubber O-Ring Used in Stainless Steel Flowmeter

Selection: Perfluororubber and EPR

Connection Port: 1_8 NPT Internal Thread Inlet and Outlet Connection Port

FLDA3405ST_FLDA3406C_FLDA3407G_FLDA3408ST_FLDA3409ST轉子流量計OMEGA

標準精度：滿量程的±5%

重復性：±0.25%

可用流量范圍：***小為10:1

***大工作壓力：200 psig/13.8 bars

***高工作溫度：121°C (250°F)

材質

流量管：厚壁硼硅酸鹽玻璃

浮子：玻璃、紅藍寶石、316不銹鋼、鎢鈷硬質合金和鉭與液體接觸的安裝接頭的選擇：黑色陽極氧化鋁或316不銹鋼

側面板：黑色陽極氧化鋁

正面防護罩：帶有縱向放大透鏡的聚碳酸酯樹脂，可增強讀數分辨率

背板：1?8”厚白色丙烯酸樹脂

O形圈和填料：鋁質／銅質流量計中采用丁鈉橡膠O形圈。不銹鋼流量計中采用氟橡膠O形圈

選配：全氟橡膠和EPR

連接口：1?8 NPT內螺紋入口和出口連接口